Standards&Grades:
EN 10219:S235JRH,S355J2H,S355NH,S355J0H
ASTM A500:Gr.A,Gr.B,Gr.C
CSA G40.20-04
AS/NZS1163
JIS G3466
Dimensions for EN10219 Rectangular Hollow Section
AxB | WT |
100x80 | 6-6.3mm |
120x60 | 2.5-8mm |
120x80 | 3-8mm |
140x80 | 4-8mm |
150x100 | 4-12.5mm |
160x80 | 4-12.5mm |
180x100 | 4-12.5mm |
200x100 | 4-12.5mm |
200x120 | 4-12.5mm |
250x150 | 5-16mm |
260x180 | 5-16mm |
300x100 | 6-16mm |
300x150 | 6-16mm |
300x200 | 6-16mm |
350x250 | 6-16mm |
400x200 | 8-16mm |
400x300 | 8-16mm |
The tolerances on dimensions are established in accordance with EN 10219-1&2
Characteristics | Tolerances | ||||
---|---|---|---|---|---|
Outside dimensions of side | (H,B![]() |
![]() ![]() |
|||
H: Longest side B: Shortest side |
(100mm![]() ![]() |
![]() |
|||
(200mm![]() |
![]() |
||||
Wall thickness(T) | (T![]() |
![]() |
|||
(5mm![]() |
![]() |
||||
Concavity / Convexity | MAX 0.8% with a min of 0.5mm | ||||
Squareness of sides | 90![]() ![]() ![]() |
||||
External corner radius | (T![]() |
1.6T![]() ![]() |
|||
(6mm![]() ![]() |
2.0T![]() ![]() |
||||
(10mm![]() |
2.4T![]() ![]() |
||||
Twist | 2mm 0.5mm/m in length | ||||
Straightness | 0.15% in total length | ||||
Mass | ![]() |
||||
Length | Approximate | 0, 50mm | |||
Exact | L![]() |
0, 5mm | |||
6,000mm![]() ![]() |
0, 15mm | ||||
10,000mm![]() |
0, 5mm 1mm/m | ||||
NOTE 1)The outside dimensions are measured across the flats at positions at least 50mm from the end of the HSS. |
PRODUCT
ADRESS
E-MAIL:ONTRENDSTEEL@GMAIL.COM,STEEL1996@126.COM
TEL:+852-53370014,+8618553349877
ADRESS:RM 1902, EASEY COMM. BLDG., 253-261 HENNESSY ROAD, WANCHAI, HONG KONG
CONTACT US
+852-53370014
If you have a question, please contact at steel1996@126.com
Copyright © ONTREND INDUSTRIAL LIMITED 2020-2021