Hot Rolled Steel Sheet Z Pile, Z Piles EN10248

Hot Rolled Steel Sheet Z Pile, Z Piles

Standards:

GB T 20933-2014JIS A 5528：2012,EN 10248-2007

Grades:

Q355B,SY295,SY390,S320GP,S355GP,KW420

Dimensions:

	W(MM)	H(MM)	T	S	SECTION	kg/m	kg/m2	Monment of Inertia
AZ12-770	770	344	8.5	8.5	120	72.6	94	21430
AZ13-770	770	344	9	9	126	76.1	99	22360
AZ14-770	770	345	9.5	9.5	132	79.5	103	23300
AZ14-770-10/10	770	345	10	10	137	82.9	108	24240
AZ12-700	700	314	805	805	123	67.7	97	18880
AZ13-700	700	315	9.5	9.5	135	74	106	20540
AZ13-700-10/10	700	316	10	10	140	77.2	110	21370
AZ14-700	700	316	10.5	10.5	146	80.3	115	22190
AZ17-700	700	420	8.5	8.5	133	73.1	104	36230
AZ18-700	700	420	9	9	139	76.5	109	37800
AZ19-700	700	421	9.5	9.5	146	80	114	39380
AZ20-700	700	421	10	10	152	83.5	119	40960
AZ24-700	700	459	11.2	11.2	174	95.7	137	55820
AZ26-700	700	460	12.2	12.2	187	102.9	147	59720
AZ28-700	700	461	13.2	13.2	200	110	157	63620
AZ24-700N	700	459	12.5	9	163	89.7	128	55890
AZ26-700N	700	460	13.5	10	176	96.6	138	59790
AZ28-700N	700	461	14.5	11	1889	104.1	149	63700
AZ36-700N	700	499	15	11.2	216	118.6	169	89610
AZ38-700N	700	500	16	12.2	230	126.4	181	94840
AZ40-700N	700	501	17	13.2	244	134.2	192	100080
AZ42-700N	700	499	18	14	259	142.1	203	104930
AZ44-700N	700	500	19	15	273	149.9	214	110150
AZ46-700N	700	501	20	16	287	157.7	225	115370
AZ18	630	380	9.5	9.5	150	74.4	118	34200
AZ18-10/10	630	381	10	10	157	77.8	123	35540
AZ26	630	427	13	12.2	198	97.8	155	55510
AZ46	580	481	18	14	291	132.6	229	110450
AZ48	580	482	19	15	307	139.6	240	115670
AZ50	580	483	20	16	322	146.7	253	121060

Michenical details:

Standards	Grades	Y.S(ReH)	T.S(Rm)	EL(A,)%	impact
		N/mm2	N/mm2	>=	J
		不小于
GB/T 20933	Q295P	295	390～570	23
	Q345P	345	480～630	22
	Q390P	390	490～650	20
	Q420P	420	520～680	19
	Q460P	460	550～720	17
GB1591	Q345B	345	470～630	22	+20℃, ≥34
JIS A 5528	SY295	295	≥450	18
	SY390	390	≥490	16

Characteristics of Z pile:
Continuous form of the web and the specific location of the interlock symmetrically on both sides of the neutral axis, these two help to improve the modulus of section.Generally,Z type sheet piles have below advantages:
Ø When modulus of section are similar,Z type sheet pile always have smaller wegiht per square meter than U type sheet piling
Ø Bigger width,means that less no of sheets are needed,saving costs on sheet piling installations or excavations.also this is good for watertight.
Ø Can be used as infill pile used together with steel pipes,and H beams.which is normally used to achive very high modulus.

Contact now to get more details!